烟气CO2捕集热能梯级利用节能工艺耦合优化

醇胺法捕集CO₂技术是一种较成熟的CO₂捕集技术，具有吸收速度快、脱除效果好等显著优点，但其操作费用高、解吸能耗大。本文以降低醇胺法捕集烟气中CO₂系统再生能耗为出发点，对常规醇胺法捕集CO₂工艺统进行了节能优化研究。在常规工艺流程基础上引入压缩式热泵节能技术，并利用Aspen Plus软件建立了基于压缩式热泵技术的CO₂捕集工艺流程模型。研究了压缩式热泵与机械蒸汽压缩回收（MVR）热泵、分流解吸、分布式换热、级间冷却4种节能工艺耦合，通过模拟计算与优化，结果说明了最佳节能工艺组合为“解吸塔压缩式热泵+贫液MVR热泵+分流解吸+级间冷却”耦合的CO₂捕集工艺流程，当解吸塔顶气体分流比为0.25∶0.75、冷富液分流比为0.05∶0.95、级间冷却器位于吸收塔17块塔板位置、吸收塔输入冷量为-3.0GJ/h时，系统再生能耗最低，为2.533 GJ/tCO₂，相比常规有机胺工艺（再生能耗4.204GJ/tCO₂）节能率39.748%。     

一种复杂产品总装工艺流程设计方法研究

围绕复杂产品总装工艺流程设计问题,从装配技术和企业经营管理的角度提出复杂产品总装工艺流程设计不仅是技术上的最优化,还应综合引入开工面限制、人力资源平衡、生产节拍需求以及投入产出比等因素,寻求技术与经营管理的平衡。提出了一种复杂产品总装工艺流程设计总体方案,设计了该方案的实现思路,并通过某型飞机总装工艺流程设计项目验证了方法的可行性和有效性。     

基于目标级联技术的含风电互联电网机组组合策略

针对含风电互联电网日前安全约束机组组合的规模大、约束复杂、求解困难等问题,提出基于目标级联分析技术的分散协调优化策略。将问题分解为负责区域间边界节点电压相角协调的上层优化问题和以并行方式独立优化各区域发电计划的下层优化问题。下层优化以弃风电量期望和电量不足期望,量化各区域内风电、负荷预测误差,以及常规机组强迫停运等系统运行不确定性所带来的风险,并以罚函数的形式引入目标函数,以综合优化系统可靠性与经济性。2区域12节点系统和IEEE RTS96三区域互联系统算例仿真验证所建模型和算法的有效性。     

Design of a thermal management system for a battery pack in an electric vehicle using Dymola

As the world moves toward more green and efficient means of modes of transport, electric vehicles are the most suitable and ideal choice to fulfill this requirement. Rapid developments in the field of battery technology are the main reason for their progress, but thermal management in such systems has been an area of concern for a long time. The work undertaken is to design and develop a battery management system (BMS) with a specific focus on the thermal behavior of the battery pack with varying vehicle loads as well as environmental conditions. To design an efficient BMS, one needs to model the battery behavior covering the thermal as well as electrical aspects of the battery. Apart from the battery model, a mathematical model of the electrical vehicle to mimic the various road load conditions for battery also needs to be modeled. Depending on the need for cooling based on battery behavior, the cooling circuit is modeled for the battery pack used. The entire study has been carried out using Dymola, a mathematical modeling software.     

谈淤泥质复杂基坑地基处理及支护技术

淤泥质地形在施工过程中可能因地基强度不够而发生事故,施工难度高,对此类地基处理及支护技术的研究较为重要。     

建筑产业转型升级新时代下高职建筑工程技术特色专业建设问题的新思考

随着建筑业技术进步和转型升级,高职建筑工程技术专业建设应顺应新时代要求,产教融合,办出特色。本文提出了“四个对接一个融合”的特色专业建设新思考。     

Thermal Management Enables Bright and Stable Perovskite Light-Emitting Diodes

The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm⁻²) with moderate radiance (<400 W sr⁻¹ m⁻²). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr⁻¹ m⁻², peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm⁻²), and tenfold increase in operational lifetime (when driven at 100 mA cm⁻²). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm⁻² and an EQE of ≈1% at 1 kA cm⁻² are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.     

融合前沿研究的液体电介质击穿教学研究

针对《高电压与绝缘技术》课程中液体电介质的教学难点，提出了融合前沿研究的液体电介质击穿教学方法。基于前沿的液体放电应用背景与先进的液体放电研究平台，形象地展示液体电介质的动态击穿过程，在教学内容、教学方法、考核方式等方面进行科教融合改进，实施“以学生为中心”理念的课程教学设计。该教学方式取得了较好的教学效果，能够为其它知识点的教学质量提升提供参考。     

高强度大桥缆索用盘条生产现状分析

最近5年，大桥缆索用镀锌钢丝抗拉强度有了大幅提高，从1 770 MPa级、1 860 MPa级、1 960 MPa级到目前的2 000 MPa及以上级别，扭转指标有了颠覆性的改变，从之前的几转到目前的十几转、二十几转。论述了国内外钢铁企业生产大桥缆索镀锌钢丝用盘条的不同现状。从成分设计、生产工艺流程、盘条韧化处理方式和组织特点等方面进行阐述，讨论了国内外不同生产工艺特点及发展趋势，为中国大桥缆索镀锌钢丝用盘条的生产提供理论支持。     

Microstructured Fischer‐Tropsch Reactor Scale‐up and Opportunities for Decentralized Application

Current projects focusing on the energy transition in traffic will rely on a high‐level technology mix for their commissioning. One of those technologies is the Fischer‐Tropsch synthesis (FTS) that converts synthesis gas into hydrocarbons of different chain lengths. A microstructured packed‐bed reactor for low‐temperature FTS is tested towards its versatility for biomass‐based syngas with a high inert gas dilution. Investigations include overall productivity, conversion, and product selectivity. A 60‐times larger pilot‐scale reactor is further tested. Evaporation cooling is introduced which allows to increase the available energy extraction from the system. From that scale on, an autothermal operation at elevated conversion levels is applicable.